Monday, January 25, 2016

My sole is black.

Put the asphalt emulsion sealant on the underside of the floor today.

P.S. a boat floor is called a sole.

Sunday, January 24, 2016

Floor part 1

FINALLY got the marine ply cut and joined to make the floor. When your dimensions exceed 4x8, you have to get creative in how you make it. The floor is 62-1/2"x 100-5/8". Because even numbers would be boring.

Here's a photo of the joints (the pencil lines were reference points):

Thursday, January 21, 2016

Light switches!

Our light switches arrived--here's how they will be assembled with chrome switch panel identification rings. We couldn't use the traditional push pull ones because the wall is too thin to accommodate them. These are only .5" from the threads to the rear with right angled wiring, they'll look perfect!

Saturday, January 16, 2016

A vision in Mahogany and Chrome

Dry Fit the hardware last night ...


Tuesday, January 5, 2016

Doors are trimmed!

Doors frames are laminated! (to the exterior side)

The door frames are now glued up to the exterior ply. Next step is to cut out the porthole opening and trim the top and overhanging sides flush.



The Route to Security

After building the framing for the doors, we needed to route and mortise the area for the door locks (will be coming back later to fit the latch). Similar to the door opening, we used Simport galvanized steel plates on either side of the lock to add security/stability.


These are specialty locks which fit nicely in the thin framing of the doors.


 Perfect fit.


A few more views of the whole door with what it looks like with the lock in place: